|
|
|
|
|
|
|
|
|
|
|
|
|
|
Convert existing 1/2 in underground sprinkler systems to low flow watering where a drip circuit can't be set up. Adjustable bubblers are available in stream spray with a maximum spray diameter of 3 ft at 30 psi or for finer water droplets, a fan spray, with spray diameter up to 13 ft at 30 psi. Bubbler flow rates are adjustable from 0 to 13 gph at 30 psi for stream type and from 0 to 24 gph at 30 psi for the fan spray. These features allow the higher flow rates required when watering large and small plants on the same circuit.
|
Convert existing 1/2 in underground sprinkler systems to low flow watering where a drip circuit can't be set up. Adjustable bubblers are available in stream spray with a maximum spray diameter of 3 ft at 30 psi or for finer water droplets, a fan spray, with spray diameter up to 13 ft at 30 psi. Bubbler flow rates are adjustable from 0 to 13 gph at 30 psi for stream type and from 0 to 24 gph at 30 psi for the fan spray. These features allow the higher flow rates required when watering large and small plants on the same circuit.
|
Designed to keep low-flow watering lines where you want them. Holds 1/2 in, 5/8 in or 0.710 in lines in place. Plastic stakes have an exclusive cleated design to hold lines securely in place.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Join or connect two lengths of line. Made from ABS. For water pressure up to 60 psi. Ends are color coded for easy size identification. 5/8 in compression coupling for use with 5/8 in (0.69 to 0.7 in OD) hose only.
|
Heavy-duty 13 in stake with adjustable 8 in rigid riser for use with low-flow sprinklers and spray heads with 10-32 NFT inlets. Just screw the sprinkler/sprayer into the rigid riser moving it up or down to water above plants. Constructed of high-density polyethylene and polypropylene.
|
Made from ABS. For water pressure up to 60 psi. Ends are color-coded for easy size identification. For use with 5/8 in (0.690 - 0.700 in OD) hose only.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Close off ends and flush hose. Made from ABS. For water pressure up to 60 psi. Closes ends of 5/8 in (0.690 to 0.700 in OD) poly hose when frequent flushing is necessary.
|
For use with 5/8 in (0.690 to 0.700 in OD) hose only.
|
Made from ABS. For water pressure up to 60 psi. Ends are color-coded for easy size identification. For use with 1/2 in (0.620 to 0.630 in OD) hose only.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Made from ABS. For water pressure up to 60 psi. Ends are color-coded for easy identification. For use with 1/2 in (0.620 to 0.630 in OD) hose only.
|
Spray wetted radius up to 6 ft at 29 psi. Includes 13 in green stake with 8 in adjustable riser and 1/4 in barbed adapter. Non-adjustable. Attach one end of 1/4 in tubing to barbed adapter and the other end to 1/2 to 0.71 in hose.
|
Join or connect two lengths of line. Made from ABS. For water pressure up to 60 psi. Ends are color coded for easy size identification. 1/2 in compression coupling for use with 1/2 in (0.62 to 0.63 in OD) hose only.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed to keep low-flowing watering lines where you want them. For fastening 1/2 to 5/8 in hose to posts, beams, decks, patios and walls.
|
For use with 5/8 in (0.69 to 0.7 in OD) hose only. Connects 5/8 in poly hose to 3/4 in male pipe thread. Washer included.
|
For use with 1/2 in (0.62 in to 0.63 in) hose only. Connects 1/2 in poly hose to 3/4 in male pipe thread. Includes washer. 3/4 in pipe thread swivel x 1/2 in compression adaptor.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with 5/8 in (0.690 to 0.700 in OD) hose only. Compression inlet/outlet shut-off for 5/8 in hose. For water pressure up to 60 psi.
|
Unique design accommodates a range of hose diameters and will not blow off hose with water pressures up to 100 psi. For use with 1/2 to 0.710 in (0.520 to 0.620 in ID) hose.
|
Connects Raindrip low-flow sprinklers to 1/2 in MPT sprinkler risers. 1/2 in FPT inlet. 10-32 FNFT outlet. Includes filter washer.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Unique design accommodates a range of hose diameters and will not blow off hose with water pressures up to 100 psi. For use with 1/2 to 0.710 in (0.520 to 0.620 in ID) hose.
|
Used to shut-off the end of 1/4 in tubing. Removes easily.
|
Unique design accommodates a range of hose diameters and will not blow off hose with water pressures up to 100 psi. For use with 1/2 to 0.710 in (0.520 to 0.620 in ID) hose.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Black poly clamps molded to fit 1/4 in tubing. Includes pre-inserted nail.
|
Connects 1/4 in tubing to existing 1/2 in MPT underground sprinkler riser. 1/2 in FPT Inlet. 1/4 in compression and 1/2 in MPT outlet. Includes filter washer.
|
Double-ended, double-duty plugs seal either large or small holes in 1/2 in, 5/8 in or 0.71 in hose.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with 1/2 in (0.62 to 0.63 in OD) hose only. Connects 1/2 in poly hose to faucet or other 3/4 in male hose thread. Includes filter washer. 3/4 in hose thread swivel x 1/2 in compression adaptor.
|
3/4 in pipe thread swivel x 1/2 in compression adaptor connects 1/2 in poly hose to 3/4 in male pipe thread. Washer included. For use with 1/2 in (0.62 to 0.63 in OD) hose only. Green compression ring.
|
Swivel adaptors join tubing to threaded adaptor. For use with 1/4 in (0.245 in OD) tube only. Connects 1/4 in vinyl tubing to 3/4 in male pipe thread. R326CT/R326CB includes washer. 3/4 in pipe threaded swivel x 1/4 in compression adaptor.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with 1/4 in (0.16 in I.D.) tube only. Connects 1/4 in tubing to faucet or other 3/4 in male hose thread. Includes filter washer.
|
3/4 in hose thread swivel x 1/2 in compression adaptor connects 1/2 in poly hose to faucet or other 3/4 in male hose thread. Includes filter washer. For use with 1/2 in (0.62 in to 0.630 in OD) hose only. Green compression ring.
|
Converts sprinkler risers to two 1/4 in drip lines. Inlet is 1/2 in FPT. Outlet is 1/4 in barbed tee.
|
|
|
