|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Vulcan center punch is made from drop forged, heat treated chrome alloy steel material with baked enamel finish and heavy duty hex shank.
|
Pro Center Punch, 1/4 in Tip, Shank Type: Hex, Shot Blast, 4 in L
|
Center punches are used for piercing, marking or starting drills in metal and other materials. The points differ to achieve the most appropriate hole size. This punch is not meant for scribing lines in metal. A black oxide finish is added to protect from rust. Made in the USA.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Mayhew Prick Punch, 5/16 in Tip, Shank Type: Hex, Black Oxide, 4-1/2 in L
|
Mayhew Prick Punch, 3/8 in Tip, Shank Type: Hex, Black Oxide, 5 in L
|
Mayhew's pin punches are used to drive out and remove already loosened pins and keys after initial movement by a solid punch. Available in fractional and metric sizes, variable point sizes and lengths for different applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Mayhew Pin Punch, 1/8 in Tip, Shank Type: Hex, Shank Diameter: 1/4 in, Alloy Steel, Black Oxide, 4-1/2 in L
|
The Vulcan center punch is made from drop forged, heat treated chrome alloy steel material with baked enamel finish and heavy duty hex shank.
|
Mayhew Prick Punch, 3/32 in Tip, Shank Type: Hex, Black Oxide, 4 in L
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Mayhew Solid Punch with Hand Tag, 5/32 in Tip, Shank Type: Hex, Shank Diameter: 3/8 in, Shot Blast, 5 in L
|
Pin punches are used to drive out and remove loosened pins and keys, not for seized pins and keys. Extensive sizes are available as well as a black oxide finish for rust protection.
|
Pin punches are used to drive out and remove loosened pins and keys, not for seized pins and keys. Extensive sizes are available as well as a black oxide finish for rust protection.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Mayhew's pin punches are used to drive out and remove already loosened pins and keys after initial movement by a solid punch. Available in fractional and metric sizes, variable point sizes and lengths for different applications.
|
Pro Center Punch, 7/16 in Tip, Shank Type: Hex, Shot Blast, 5 in L
|
Mayhew Solid Punch, 1/8 in Tip, Shank Type: Hex, Black Oxide, 5 in L
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pin punches are used to drive out and remove loosened pins and keys, not for seized pins and keys. Extensive sizes are available as well as a black oxide finish for rust protection.
|
Center punches are used for piercing, marking or starting drills in metal and other materials. The points differ to achieve the most appropriate hole size. This punch is not meant for scribing lines in metal. A black oxide finish is added to protect from rust. Made in the USA.
|
Mayhew Solid Punch with Hand Tag, 3/16 in Tip, Shank Type: Hex, Shank Diameter: 3/8 in, Shot Blast, 5 in L
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Mayhew's pin punches are used to drive out and remove already loosened pins and keys after initial movement by a solid punch. Available in fractional and metric sizes, variable point sizes and lengths for different applications.
|
Line-up punches are used to align the holes through which rivets, pins or bolts will be inserted, but not for driving the hardware. Sizes vary for the optimal alignment.
|
Hit Tool Prick Punch and Center Punch, 1/8, 3/16 in Tip, Shank Type: Spring Loaded, Steel, Black-Oxide, 7 in L
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This dual tipped spring actuated punch tool has a door hinge pin remover on one end and a steel faced hammer and installer on the other. The spring driven door hinge pin punch quickly and easily removes hinge pins from door hinges, while the steel faced hammer punch tool precisely installs hinge pins without damaging trim or doors. A unique cupped face design makes squaring up the pin remover effortless, minimizing unintended movement and preserving surrounding surfaces. The compact, spring-loaded hammer can be used in a variety of ways, fitting in spaces regular hammers cannot.
|
This single headed tool is a spring actuated high-speed steel prick punch, designed for marking various materials. The steel tip can be sharpened, increasing the life of the tool without compromising the tool?s integrity. This versatile tool enables highly visible, centered marks to guide drills and screws into multiple surfaces, including wood, plastic and many types of hard and soft metal as well as driving out rivets. Prevent your drill from "walking" and ensure quality alignment the first time, every time in most any surface.
|
Lightweight aluminum body with alloy steel internal components that provides accurate center punches to prevent drill bits from traveling. One-handed operation. No hammer needed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Mayhew's line-up punches are used to align holes through which rivets, pins or bolts will be inserted. Available in variable point size, shank size and taper length for the ideal alignment.
|
This single headed tool is a spring driven self-centering screw hole punch to create centered holes for mounting hardware. This simple tool easily creates highly visible, centered holes to guide drills and screws into multiple surfaces. It?s ideal for mounting countersunk hardware such as brackets, drawer pulls, faceplates, hinges, latches and strike plates. This tool marks wood, plastic and other soft metals and materials.
|
Provides accurate center punches without drill bit traveling, one-handed operation, no hammer needed. Spring tension impact adjustments for working with lighter materials. Replaceable hardened steel point and black oxide finish prevents rust.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
lightweight aluminum body with alloy steel internal components, provides accurate center punches without drill bit traveling. One-handed operation, no hammer needed. Spring tension impact adjustments for working with lighter materials.
|
Made of heat-treated, high-carbon American steel. Features a long, tapered point to aid in aligning and sizing holes in metal and various materials. Strong points and "target head" render long service.
|
Provides accurate center punches to prevent drill bits from traveling, handles heavy-duty metals, yet not overbearing when working with wood or thin-walled tubing. One-handed operation, no hammer needed. Spring tension impact adjustments for working with lighter materials. Black oxide finish to prevent rust. Used for punching, marking and staking and hardened steel point is replaceable.
|
|
|
