|
|
|
|
|
|
|
|
|
|
|
|
|
|
9/16 in to 24 fine thread flare end for space heaters. Bagged with flag tag.
|
Two-pieces construction, nut and body. Use with copper, brass, aluminum or steel tubing. -65 to 250 deg F temperature range. Standard fittings use short nuts. Long nuts are used for higher vibration applications. Resists mechanical pullout. Easy to disassemble and can be reassembled many times with no effect on the seal. Primarily used to fuel equipment, plumbing, gases, refrigeration and vacuum. UPC individually bagged.
|
Fitting for 5/8 in OD tube (brass). New style 15/16-16 thread. AGA design certified.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Two-pieces construction, nut and body. Use with copper, brass, aluminum or steel tubing. -65 to 250 deg F temperature range. Standard fittings use short nuts. Long nuts are used for higher vibration applications. Resists mechanical pullout. Easy to disassemble and can be reassembled many times with no effect on the seal. Primarily used to fuel equipment, plumbing, gases, refrigeration and vacuum. UPC individually bagged.
|
For use with F0-6 (9/16-24) flare nut IBM # 9166414.
|
9/16 in to 24 fine thread flare end for space heaters. Bagged with flag tag.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For 1/4 in ID (3/8 in OD) corrugated tube. For gas clothes dryer connections. Tapped 1/8 in female pipe thread. Dimension of 5-1/2 in L x 3.8 in W x 0.6 in D.
|
Fitting for 5/8 in OD tube (brass). New style 15/16-16 thread. AGA design certified.
|
Fitting for 5/8 in OD tube (brass). New style 15/16-16 thread. A.G.A. design certified.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SharkBite Gas Connector, Nominal Size: 5/8 x 1/2 in, Flare x FIP Connection, Steel, Zinc, 1-1/2 in L
|
Eastman Gas Adapter, Nominal Size: 1/2 in, Flare x FIP Connection, Steel, Zinc-Plated
|
For 1/4 in ID (3/8 in OD) corrugated tube. Recommended for gas clothes dryer connections. Use with SL or RSL Series connectors. Tapped 3/8 in female pipe thread.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For corrugated tube. Recommended for gas range connections.
|
The flare reducing male adapter is highly dependable and an economical choice of fitting for refrigeration, compression, heating and air and other industrial markets. This all-brass fitting features a vibration-resistant construction. It resists mechanical pullout and is designed for high pressure service.
|
For use with F0-6 (9/16-24) flare nut IBM # 9166414.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Eastman Gas Adapter, Nominal Size: 3/8 in, Flare x MIP Connection, Brass, Zinc-Plated
|
Eastman Gas Adapter, Nominal Size: 5/8 x 1/2 in, Flare x MIP Connection
|
For 1/4 in ID (3/8 in OD) corrugated tube. Recommended for gas clothes dryer connections. Use with PlumbShop SL or RSL Series connectors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Eastman Gas Adapter, Nominal Size: 1/2 in, Flare x MIP Connection, Steel, Zinc-Plated
|
Two-pieces construction, nut and body. Use with copper, brass, aluminum or steel tubing. -65 to 250 deg F temperature range. Standard fittings use short nuts. Long nuts are used for higher vibration applications. Resists mechanical pullout. Easy to disassemble and can be reassembled many times with no effect on the seal. Primarily used to fuel equipment, plumbing, gases, refrigeration and vacuum. UPC individually bagged.
|
15/16-16 thread for brass range connectors. UPC individually bagged.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For corrugated tube. Recommended for gas range connections.
|
Eastman Gas Adapter, Nominal Size: 5/8 x 3/4 in, Flare x MIP Connection
|
For 1/2 in ID (5/8 in OD) corrugated. Recommended for gas range connectors. Use with PlumbShop SC or RSC Series connectors. 1/2 in MIP end tapped 3/8 in FIP thread, 3/4 in MIP tapped 1/2 in FIP.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For 3/8 in ID (1/2 in OD) corrugated tube. Recommended for forced air heaters, gas ranges, furnaces and water heater connections. Use with PlumbShop SD or RSD Series connectors.
|
Two-pieces construction, nut and body. Use with copper, brass, aluminum or steel tubing. -65 to 250 deg F temperature range. Standard fittings use short nuts. Long nuts are used for higher vibration applications. Resists mechanical pullout. Easy to disassemble and can be reassembled many times with no effect on the seal. Primarily used to fuel equipment, plumbing, gases, refrigeration and vacuum. UPC individually bagged.
|
15/16-16 thread for brass range connectors. UPC individually bagged.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For 1/2 in ID (5/8 in OD) corrugated. Recommended for gas range connectors. Use with PlumbShop SC or RSC Series connectors. 1/2 in MIP end tapped 3/8 in FIP thread, 3/4 in MIP tapped 1/2 in FIP.
|
For 3/8 in ID (1/2 in OD) corrugated tube. Recommended for fixed air heater, gas range, furnace and water heater connections. Used with PlumbShop SD or RSD Series connectors. Tapped 3/8 in FIP thread.
|
|
|
