|
|
|
|
|
|
|
|
|
|
|
|
|
|
Twin probe circuit tester tests AC/DC voltage from 80 to 250 VAC/VDC. The neon indicator glows when voltage is present and brightens as voltage increases. Offers insulated housing and test leads for safety. Built-in pocket clip for added convenience. Tests DC motors, switches and outlets.
|
For testing electric circuits from 90 to 600 V. Detects presence of power on either AC or DC circuits. Identifies circuit conductors.
|
The continuity tester is very easy-to-use and is used to test for breaks in non-energized wires or cords. Continuity has a bright 360 deg visual indicator located near the tip along with a flexible lead for ease of use.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This low voltage tester tests for AC/DC Voltage from 5 to 50 VAC/VDC, 50 to 60 Hz. The indicator glows when voltage is present and brightens as voltage increases. Applications include testing low volt outdoor lighting, low volt control panels, doorbells, alarm systems and automotive 12 VDC and 36 VDC.
|
The patented design of this heavy-duty AC/DC voltage tester allows for convenient single hand testing of outlets when the probes are snapped into the bottom housing of the tester. Just insert the probes into the outlet and if voltage is present the neon indicator will glow.
|
This 120 VAC outlet tester tests standard receptacles to ensure proper wiring. Neon light indicators give positive indication of circuit status. This compact unit plugs into any standard three-wire/grounded receptacle (110 to 125 VAC circuits). It tests for six circuit conditions: open ground, open neutral, open hot, hot/ground reverse, hot/neutral reverse and correct wiring.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heavy-duty three-way voltage tester tests AC/DC voltage at 120, 240 and 277 V. Individual indicators for each voltage range assures reliability. 24 in test lead is long enough for convenient testing. Unit is both durable and compact. Testing applications include outlets, panels, light fixtures, switches, circuit breakers and more.
|
Wilmar Multimeter Tester, Accuracy: +/-0.5 %, Display Type: LCD, Digital, Power Source: Battery, Power Supply: 9 V
|
Klein Tools RT110 receptacle tester detects the most common wiring problems in standard receptacles. Conditions indicated are wiring correct, open ground, reverse electrical outlet, open hot, open neutral, hot/ground reversed. Conditions not indicated are quality of ground, multiple hot wires, combinations of defects, reversal of grounded and grounding conductors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Safety is the number one priority on any jobsite. Gardner Bender's testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. The condition of electrical installations can be established when contractors use test equipment. Any test unit that can be used to measure or review an application without coming in contact with a live conductor is a necessity. Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal, the condition of electrical installations can be established when contractors use test equipment. Gardner Bender is pleased to offer an innovative full feature line of test equipment designed to make electrical work faster and safer.
|
The Gardner Bender GFCI outlet tester was ergonomically designed for today's electrical professional. This unit plugs into any standard 120 V outlet and indicates the wiring condition of the outlet. The GFI-3501 also has the ability to test any outlet protected by a ground fault receptacle to ensure proper interruption operation. With charts on both sides of the unit, any user can quickly identify which of the six wiring conditions is indicated by the integrated neon lamps. Test any GFCI outlet, standard outlet or extension cord.
|
Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal. The condition of electrical installations can be established when contractors use test equipment. Gardner Bender is pleased to offer an innovative full feature line of test equipment designed to make electrical work faster and safer.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Replacement leads for meters. Tough ABS construction. Flexible cords for easy use. Double insulated with removable caps for safety. Slip resistant and comfortable handling. Universal fit with most meters. CAT3 1000V, 40" length.
|
Southwire Receptacle Tester, 120 V Supply
|
Klein Tools ET45 is an electronic voltage tester. Designed as a simple, easy to use tester to check, verify or troubleshoot common residential electrical wiring in electrical outlets, light fixtures, doorbells and more. This tester does not require batteries, and features a pocket clip for convenient carrying.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Klein Tools receptacle testers are designed to detect the most common wiring problems in standard and GFCI receptacles. A convenient chart on the tester helps determine wiring condition in outlet, based on LED lights results. Conditions indicated are open ground, reverse polarity, open hot, open neutral, hot/ground reversed.
|
Testing for voltage to any electrical project is important for your safety. This compact multi-purpose unit makes it easy with a combination voltage probe and continuity tester built into a single unit with a convenient screwdriver tip designed for quick faceplate removal. Its compact size fits easily into a pocket or tool box for retrieval as needed. Use to test outlets, fuses, switches, electronics, extension cords, light fixtures and low-voltage lighting circuits.
|
Model 40141S four-way voltage tester is a handy, pocket size tester that checks live AC voltage from 120 to 480 V and DC voltage from 160 to 600 V in four easy steps. The 40141S is easy to read and features a convenient, compact design.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Convenient pocket size probe allows checking of voltage potential with attached test leads or probes and patented snap-in probe storage is preset to standard wall outlet spacing.
|
Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal; the condition of electrical installations can be established when contractors use test equipment. Gardner Bender is pleased to offer an innovative full feature line of test equipment designed to make electrical work faster and safer. The GVD-3504 tester from Gardner Bender indicates the presence of AC Voltage from 50 to 600 V with visual (flashing) and audible (beeping) indicators.
|
Easy-to-use receptacle tester identifies common wiring errors in 120 VAC outlets plus tests GFCI outlets. Performs seven tests including the GFCI test.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal; the condition of electrical installations can be established when contractors use test equipment. Pocket sized analog tester. Tests voltage, DC voltage, DC current, resistance, continuity and batteries.
|
A non-contact voltage tester serves as a key component in any electrical toolkit, allowing the user to verify the presence of AC voltage prior to working on an electrical installation or during troubleshooting without requiring physical contact with live electrical conductors. Engineered to specifications required by professional electricians the Sperry Instruments VD6508 non-contact voltage detector features both audible (beeping) and visual (360 deg flashing red light) indicators to alert the user of the presence of AC voltage from 50 to 1000 V. It also includes a built-in flashlight. The fully insulated probe tip eliminates the risk of contacting live electrical wires while the patented battery check feature designed into the unit ensures tester and batteries are operating properly, virtually eliminating false negative readings. This unit features 250 lb crush-rated impact-resistant ABS housing to withstand tough applications while the design ensures a positive user experience over long hours of repeated use. Applications include quickly locating hot terminals in receptacles, pin pointing breaks in wires and detecting the absence/presence of voltage at outlets, circuit breaker panels, light fixtures, switches and motors. The unit includes a pocket clip for secure portability. Tester is cETLus Listed, CE Certified, Cat III 1000 V/IV 600 V-rated and includes a limited lifetime warranty. Operates from a single AAA battery (included). Frequency 50 to 60 Hz.
|
The Klein Tools test lead set is intended for use as replacement test leads for meters that have standard, banana-type input jacks. They feature removable alligator clips that attach to wires and other conductors. These test leads are part of a full line of Klein Tools meters and testers, designed by electricians for electricians.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Klein Tools ET40 is an electronic ac/dc voltage tester. It features indicators for positive and negative dc polarity, and tests DC voltages as low as 1.5 V. It tests AC voltages 12 to 240 VAC. Excellent for checking, verifying or troubleshooting common residential electrical wiring in electrical outlets, light fixtures, doorbells and more. It operates on 2 x AAA batteries.
|
Gardner Bender's GUSB-3450 USB multimeter is used to confirm USB port voltage and current and check chargers, cables and USB ports. The tester features a high impact housing and a pocket clip. Measure current draw, measure performance of solar USB chargers and test for proper wiring and polarity. The easy-to-understand display alternates between volts and amps. Features a 1 year warranty.
|
60010S test lead kit includes universal replacement leads for all Southwire meters except for the 10010S analog multimeter.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Southwire Adapter Kit, Dimensions: 3.94 in H x 1.1 in W x 3.15 in D, Includes: Light Bulb Socket Adapter and Alligator Clip Adapter
|
Southwire NCV Detector, Measuring Functions: AC Voltage, Measuring Range: 100 to 600 VAC, Display Type: LED, Power Source: Battery, Temperature Rating: 32 to 104 deg F, Dimensions: 6.23 x 0.83 x 0.99 in
|
Southwire Alligator Clip Kit, 0.8 in Jaw Opening, 1000 V, 1.81 in Length, 3.46 in Width
|
|
|
