|
|
|
|
|
|
|
|
|
|
|
|
|
|
With captive nails. Four integral clamps, two each end. Meets NEMA OS-2, UL Listed, classified for fire wall assemblies.
|
With captive nails. Four integral clamps, two each end. Meets NEMA OS-2, UL Listed, classified for fire wall assemblies.
|
With captive nails. Four integral clamps, two each end. Meets NEMA OS-2, UL Listed, classified for fire wall assemblies.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Thermoset fiberglass with angled mid-nails. Nails are installed as fastening devices. 2 hrs wall and ceiling fire rating. Lightweight, non-corrosive, non-conductive, no ground required. Will not melt or distort in high heat. Shatter-resistant in cold temperatures. UL listed.
|
Thermoset fiberglass with angled mid-nails. Nails are installed as fastening devices. 2 hrs wall and ceiling fire rating. Lightweight, non-corrosive, non-conductive, no ground required. Will not melt or distort in high heat. Shatter-resistant in cold temperatures. UL listed.
|
New work applications, shallow PVC switch box. Integral brackets. 1-1/4" depth x 2-3/8" x 3-5/8". UL Listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed and listed for use with non-metallic sheathed cable. With mounting ears. Permissible for use with 90 degree C connectors. 8 cubic inch capacity. 1-1/4" depth x 2-3/8" x 3-5/8". UL Listed.
|
New work safe, non-conductive. With captive nails. Eight integral clamps, four each side. 32 cubic inches. Meets NEMA OS-2, UL Listed, classified for fire wall assemblies. 3" depth x 4" x 3-3/4".
|
Lightweight design and durable plastic. Listed for masonry walls. Safe to install and will never rust or corrode. Includes nails for quick, easy installation. 22 cu-in rigid wall. 3-7/8 in x 2-3/8 in x 3-3/4 in. UL listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Old work wall case. Safe, non-conductive. Two Zip-Mount retainers. Four integral clamps, two each end; mounting ears. 14 cubic inch, 2-3/4" x 2-1/4" x 4-1/8". UL Listed.
|
For telecommunications and other low voltage wiring. Suitable for old work applications. 1.18 in D x 2.18 in x 3.05 in.
|
Safe, Non-conductive. With bracket for 3/8 to 5/8 in wallboard. Steel and wood studs, 4 knockouts. 2-15/16 in D x 3-3/4 in x 2-1/4 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plaster ears, old work swing style clips secure box in wall. Integral clamps. Two hour fire rated. Mounting clips. 3 in D. 14 cu-in capacity. UL listed.
|
Backless bracket with nail on mounting and screw-in bracket. Non-metallic. Non-conductive. 3.73 in x 2.32 in.
|
Non-metallic. Non-conductive. Suitable for masonry walls. 4 in x 4 in x 1-1/2 in. 1/2 in and 3/4 in knockouts. UL listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Thermoset-fiberglass, with angled mid-nails, speed clamps. Lightweight, non-corrosive, non-conductive, no ground required, will not melt or distort in high heat. Shatter resistant in cold temperatures. 2 hour wall fire rating. 3" depth x 4" x 3-3/4". UL Listed.
|
fiberglassBOX Switch/Outlet Box, Knockout Cable Entry, 2 Outlets, 4 Knockouts, 1 Gangs, Rectangular Shape, 16 cu-in, Dimensions: 3-1/4 in H x 2-3/8 in W x 2-7/8 in D, Fiberglass/Polyester, Off-White, Bracket Mounting
|
Non-metallic, non-conductive. Punch type knockout. Quickly connects. Square, fits commercial and residential requirements. For 600 V use in ceilings, floors and walls in commercial, industrial and residential buildings not more than three floors above grade. Colored in brilliant electric blue. 3 in x 2-1/4 in x 3 in. UL listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PVC handy box used for many wiring applications. Weather-resistant and Non-conductive. Will accept metal handy box covers or Non-metallic covers. 35 cu-in rigid wall.
|
Non-metallic, non-conductive. Punch type knockout. Quickly connects. Square, fits commercial and residential requirements. For 600 volt use in ceilings, floors, and walls in commercial, industrial and residential buildings not more than three floors above grade. Colored in brilliant electric blue. 3" x 2-1/4" x 1-7/8". UL Listed.
|
With mounting ears and swing bracket. 4 integral clamps, 2 each end. UL Listed, meets NEMA OS-2. Suitable for masonry walls, not UL Classified for Fire Resistance. PVC construction. 20 cubic inch capacity. 3-5/8" depth x 2-5/16" x 4-1/8".
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Molded of engineering grade non-metallic thermoplastic. Adjustable, no need to remove or relocate mounting screws to re-position the box. Slots retain slider plate and guide it in a straight motion. Internal rails guide slider plate for smooth mounting adjustability in wall substrates from 1/2 in to 1-3/8 in thick and ceiling substrates from 1/2 in to 1-5/32 in. Square corner design allows easy wall cut-in (Old work applications). Molded spline device holes for quick device screw installation. 23 cu-in volume, 1/2 in knockout. Internal steel, stud/wood screws. 3-9/16 in D x 2-1/4 in W x 3-3/4 in H. UL listed for 2 hrs fire resistive walls and ceilings.
|
Thermoset fiberglass with ears, wing brackets, speed clamps. 2 hrs wall and ceiling fire rating. Lightweight, non-corrosive, non-conductive, no ground required. Will not melt or distort in high heat. Shatter-resistant in cold temperatures. 2-7/8 in x 2-3/8 x 3-1/4. UL listed.
|
For installation of low voltage devices in an existing wall. Thinner rectangular flange for faster, easier installation, less protrusion on the wall. Shallow bracket means less material, easier to work with. Can be installed vertically or horizontally. UL listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Provides simple installation and allows adjustment from 0 to 1-3/4 in with the turn of a screw. Clip the included bracket onto any stud, mounts square and secure every time. Securing the bracket to the stud ensures that the box will not move. Comes preset at 1/2 in. 3-3/8 in D x 3-7/8 in x 3-3/4 in. Permissible for use with 90 deg C connectors. Satisfies NEC 370-20. UL listed 5Z74 and classified 2 Hr W/C.
|
Thermoset fiberglass with angled mid-nails, speed clamps. Lightweight, non-corrosive, non-conductive, no ground required. Will not melt or distort in high heat. Shatter-resistant in cold temperatures. 2 hrs wall fire rating. 3 in x 5-11/16 in x 3-3/4 in. UL listed.
|
Old work PVC box. With swing clips and integral clamps to hold securely. 3-5/32 in D. 25 cu-in capacity.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
With mounting ears and 2 swing clamps. Suitable for masonry walls, UL Listed, not UL Classified for fire resistance. 2-3/4" depth x 3-1/8" x 3-15/16"
|
With captive nails and bracket support, twelve integral clamps, six each side. 44 cubic inch capacity, 2-11/16" depth x 3-3/4" x 5-5/8". Meets NEMA OS-2, UL Listed, classified for fire wall assemblies.
|
Thermoset fiberglass with ears, wing brackets and speed clamps. Lightweight, non-corrosive, non-conductive, no ground required. Will not melt or distort in high heat. Shatter-resistant in cold temperatures. 2-3/4 in x 4-1/8 in x 3-1/4 in. 2 hrs wall fire rating. UL listed.
|
|
|
