|
|
|
|
|
|
|
|
|
|
|
Halo Coil Spring, Includes: (4) Coil Replacement Springs
|
Halo E-series tapered metal baffle with white trim, 2 included, wide and narrow. For use with E7RICAT and E7ICAT as well as Halo H7 series. UL listed.
|
Coilex tapered plastic baffle-trim with self-flange in the 6 in trim family for use in recessed downlighting. Compatible for use in Halo and other housings.
|
|
|
|
|
|
|
|
|
|
|
|
|
Open in the 6 in trim family for use in recessed downlighting. Compatible for use in Halo and other housings.
|
Open recessed trim ring, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers): H7T (284.2474), H7RT (942.0381) and SHALLOW H27T (989.1672). Sleeved.
|
Open trim with socket support in the 6 in trim family for use in recessed downlighting. Compatible for use in Halo and other housings.
|
|
|
|
|
|
|
|
|
|
|
|
|
"For use with 120 volt Incandescent lamps. Aluminum construction for greater heat dissipation. For installations where housing will be in direct contact with ceiling insulation. Integral thermal protector guards against misuse of insulation materials and improper lamping. Adjustable socket bracket assures proper and consistent lamp positing. Junction box is listed for through branch circuit wiring and has seven 1/2"" knockouts. Slide-N-Slide connectors allow non-metallic sheathed cable to be installed without removing knockouts. Pre-installed captive bar hangers allow housing to be positioned at any point within a 24"" joist span. Can be field shortened for 12"" joist. Installation: 7-1/2"" height allows use in 2 x 8 joist construction. Housing accommodates ceilings up to 2"" thick. Requires 6-1/2"" ceiling opening. Listings: UL Damp Locations. UL Feed Through. UL Listed for direct contact with insulation. CSA Certified. IP Rated."
|
Full cone baffle-trim with self-flange in the 6 in trim family for use in recessed downlighting. Compatible for use in Halo and other housings.
|
Diameter of 6-1/2", white trim for use with 5" incandescent rounds. Non-insulated or insulated housings. 75 watt maximum. Bulb sold separately. For use with 5" housings: Halo model numbers (Orgill SKU numbers), H5T (424.1535), H5ICAT (651.3956) and H5RT (635.6182).
|
|
|
|
|
|
|
|
|
|
|
|
|
White trim ring with phenolic baffle, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers), H7T (540.1815) and H7RT (942.0381).
|
Air-Tite? baffle trim with reflector 6 in trim family for use in recessed downlighting. Compatible for use in Halo and other housings.
|
The H7 recessed housing is the standard in the industry for both commercial and residential applications. The wide variety of trims available allows a number of different lighting effects to be created with one basic housing. H7ICAT is for installations where the housing will be in direct contact with insulation and also meet restricted air flow requirements.
|
|
|
|
|
|
|
|
|
|
|
|
|
Metal baffle trim for use with the H5 Series housings. Trim includes dual-position socket supports for BR, R and PAR lamps.
|
Eaton Wiring Devices Specular Reflector, Metal/Plastic, White, 5 in Dia, 2-1/2 in H, Lamp Type: Halogen
|
Albalite glass lens trim in the 6 in trim family for use in recessed downlighting. Compatible for use in Halo and other housings.
|
|
|
|
|
|
|
|
|
|
|
|
|
The Halo H5 Series is designed to accommodate smaller sized PAR20 and PAR30 halogen lamps. The wide variety of trims available allows a number of different lighting effects to be created with one basic housing. The H5 trim size makes the H5RT the right choice for applications where dramatic yet inconspicuous lighting is required in an existing ceiling.
|
The H750ICAT is a dedicated LED new construction housing for use with halo H7 collection 600 Series and 900 Series LED modules. The H750ICAT is designed for insulated ceilings and can be in direct contact with ceiling insulation. This AIR-TITE? housing design prevents airflow between attic and living areas and saves on both heating and air conditioning costs. The H750ICAT connector system provides high efficacy code compliance when used with Halo H7 collection LED modules.
|
Wet location and AIR-TITE listed white trim with frosted Albalite Lens. 8" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers): H7T (284.2474), H7RT (942.0381), and SHALLOW H27T (989.1672). Sleeved.
|
|
|
|
|
|
|
|
|
|
|
|
|
Eyeball 30 deg tilt, self-flanged in the 6 in trim family for use in recessed downlighting. Compatible for use in Halo and other housings.
|
Coilex? baffle trim in the 6 in trim family for use in recessed downlighting. Compatible for use in Halo and other housings.
|
The H7 family of recessed housings are the standard in the industry for both commercial and residential applications. The wide variety of trims available allows a number of different lighting effects to be created with one basic housing. The H7RICT is designed for installations where the housing will be in direct contact with insulation. H7RICT may be converted into Air-Tite? installation when used with Air-Tite? trims.
|
|
|
|
|
|
|
|
|
|
|
|
|
The H750RICAT is a dedicated LED Remodel housing for use with Halo H7 Collection 600 900 Series LED modules. The H750RICAT is designed for remodel into insulated ceilings and can be in direct contact with ceiling insulation. This AIR-TITE? housing design prevents airflow between attic and living areas and saves on both heating and air conditioning costs. The H750RICAT LED connector system provides high efficiency code compliance when used with Halo H7 Collection 600 and 900 Series LED modules.
|
The H99TAT is a small aperture Non-IC AIR-TITE? housing for providing accent and task lighting. The H99TAT is designed for use in non-insulated ceiling or for insulated ceilings but insulation must be kept 3 in from all sides of the housing. Non-IC Housing is AIR-TITE? but insulation must be kept 3 in away from all sides of housing.
|
Halo E-series 6 in white trim with white eyeball. 35 deg tilt. Uses PAR30 lamp. UL listed. For use with E7RICAT and E7ICAT as well as Halo H7 series.
|
|
|
|
|
|
|
|
|
|
|
|
|
Ideal as an energy-saving retrofit solution, but also suitable for new construction and remodeling installations, the LT4 is an LED baffle trim module for use in 4 in aperture recessed downlights. The downlight is UL certified for use with HALO and other compatible housings and the precision construction makes any housing airtight for added HVAC savings and code compliance. A wide distribution makes the LT4 ideal for general and task lighting.
|
The Halo H5 Series is designed to accommodate smaller sized PAR20 and PAR30 halogen lamps. The wide variety of trims available allows a number of different lighting effects to be created with one basic housing. The H5ICAT is designed for use in insulated ceiling applications. This is an Air-Tite? housing and may be used to meet restricted air flow requirements.
|
The H27RT housing is designed for remodeling use in shallow ceiling. The wide variety of trims available allows a number of different lighting effects to be created with one basic housing. The H27RT is designed for use in non-insulated shallow ceilings. If ceiling insulation is present, it must be kept 3 in from all sides of housing.
|
|
|
|
|
|
|
|
|
|
|
|
|
Halo E-Series 4 in white trim with step plastic baffle. For use with E4RTATSB, E4ICATSB or Halo H99 series. UL listed.
|
Halo E-Series 6 in white shower trim with frosted glass lens. Wet location-rated for use with E7RICAT and E7ICAT as well as Halo H7 series. UL listed.
|
Coilex? baffle trim for 4 in H99 incandescent family and H470 CFL family of recessed housings. Die-cast trim ring is available in a variety of finishes. Polymer Coilex? baffle is available in white and black. Three cat's paw springs secure trim in housing.
|
|