Home > HARDWARE > CONSTRUCTION HARDWARE > JOIST HANGERS & CONNECTORS > MENDING PLATES
Sort By:
1
TIE PLATE HEAVY ZMAX 3 X 7IN  MENDING PLATE GALV 20GA 1X4IN E-Z MENDER PLATE BLACK 4 X 4IN
The HTP is designed to resist tension when installed on the side of 2 x 4 or larger members. This heavy tie plate is ideal for a variety of applications including connecting two members end-to-end or attaching multiple members together. The HTP can be installed with either nails or Strong-Drive? SD connector screws. Versatile and easy-to-use mending plates for wood-to-wood connections. No nails or notching of wood required. For non-structural applications only; not for truss applications. The E-Z Mender is part of a Simpson Strong-Tie? line of products designed to help make reinforcing fence posts simple and economical. The E-Z product line offers solutions for a variety of fence post projects. These fence post repair brackets allow for easy repair of rotted or damaged 4 x 4 wood posts installed in concrete or dirt. Installed in pairs, they reinforce weakened wood posts as a cost-effective alternative to replacing the post or the concrete.
MENDING PLATE GALV 20GA 2X4IN FOUNDATION PLATE RETROFIT FLAT MENDING PLATE GALV 20GA 3X6IN
Versatile and easy-to-use mending plates for wood-to-wood connections. No nails or notching of wood required. For non-structural applications only; not for truss applications. The FRFP is designed to connect the mudsill to the foundation and provide lateral load resistance. This flat retrofit foundation plate features a design that allows the designer to maintain prescriptive requirements. The FRFP can be used by filling the three round holes or as an alternative, filling two optional triangle holes to allow designers increased loads and greater spacing. Versatile and easy-to-use mending plates for wood-to-wood connections. No nails or notching of wood required. For non-structural applications only; not for truss applications.
SHIELD PLATE ZMAX 16GA 5 X 8IN LAT TIE PLATE GALV 4-1/2X5-1/8 LAT TIE PLATE GALV 3 X 4-1/4IN
PSPN58Z and PSPN516Z protecting shield plate fastener stoppers meet IRC, IBC and the International Plumbing Code. PSPN516Z meets the code plumbing protection requirements as well as having additional fasteners if the designer chooses to use it as a track splice strap. The LTP is designed to transfer shear forces for plate-to-rim board or blocking connections. This lateral tie plate can be securely installed over plywood sheathing or directly to the framing members. The LTP features strategically spaced nail holes to prevent wood splitting for single and double-top-plate applications. The LTP is designed to transfer shear forces for plate-to-rim board or blocking connections. This lateral tie plate can be securely installed over plywood sheathing or directly to the framing members. The LTP features strategically spaced nail holes to prevent wood splitting for single and double-top-plate applications.
FOUNDATION PLATE RETROFIT UNIV
The URFP universal design provides a method to secure the mudsill to many foundation types. The URFP scalloped, slotted hole feature allows installation flexibility when the mudsill is offset or inset from the foundation edge. With allowable loads deriving from longitudinal embossments and stiffening darts, the URFP may be used as a one-for-one replacement of 1/2 or 5/8 in mudsill anchors.
   
 
1