|
|
|
|
|
|
|
|
|
|
|
|
|
|
This roller is a replacement for some Croft and Keller doors. It is also found in other household situations from the closet to the bathroom. It is a ball bearing 3/4 in high-density polyethylene roller on a threaded hex hub. Often fits onto a bracket that is attached to the door while the roller rides in an upper track above the door opening.
|
Plastic roller with narrow center groove 7/32 in W nylon wheel, concave edge. Includes a 8-32 x 3/8 in machine screw with binder post nut. Fits on air control doors.
|
This is a roller is used on bottom-mount installations. It is a 1-1/4 in high-density polyethylene roller with a 3/8 in axle hole. The 1/4-20 x 3/4 in carriage bolt inserts into the 3/8 in Dia high-density polyethylene bushing which allows the roller to turn on-the bushing/axle smoothly. The carriage bolt is then secured in the bottom rail with a nut.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This 1 in Dia nylon constructed wheel features a center grooved design. It has a 1/4 in Dia hole that fits most any axle. This universal design is used by many door manufacturers.
|
1/4 in W center groove nylon wheel, high-tension 2-1/2 in L heat treated steel spring and #8 x 3/8 in Phillips pan head sheet metal screw.
|
Consists of 1/4 in W center groove wheel. Heat-treated, high-tension adjustable steel M-spring. Used by several patio door manufacturers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bent spring design used by Academy Mfg. And others. Center grooved 5/16 in W wheel, 2-1/4 in L x 5/16 in W flat high-tension heat treated steel spring and #8 x 3/8 in Phillips sheet metal screw.
|
Used by metal industries. Center grooved, 1/4 in W, roller. 1-3/4 in L, high-tension, heat treated steel spring. Includes #8 x 3/8 in Phillips sheet metal screw.
|
Are you having trouble sliding your screen door open or closed. Have you checked your rollers/roller assemblies. Don't replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This roller assembly with M-shaped tension spring with a 1 in Dia steel ball bearing roller is used by a variety of patio door manufacturers. The heat-treated tension spring is 2-5/16 in L and shaped like an M, giving it the tension needed by the screen door to slide properly. Order yours today and have your door slide like new.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Are you having trouble sliding your screen door open or closed. Have you checked your rollers/roller assemblies. Don't replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This is an Arcadia style roller assembly used by Arcadia doors as well as a variety of other sliding patio door manufacturers. This is also currently a very popular design amongst patio door manufacturers in today's market place. It has a wire tension spring and comes with a 1-1/4 in Dia high-density polyethylene roller and fits onto the Prime-Line part B 569 corner insert (sold separately). It is often used on-the top as well as the bottom of the sliding screen door. Also look at Prime-Line parts B 515, B 610, B 714, B 736 and B 821 for similar spring tension rollers. Order yours today and have your door slide like new.
|
Are you having trouble sliding your screen door open or closed. Have you checked your rollers/roller assemblies. Don't replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This rocker style spring tension roller assembly is used by several patio door manufacturers. The body is stamped steel with a tension spring attached. It has a 1-1/4 in high-density polyethylene roller. It is used on-the top as well as the bottom of the screen door. Order yours today and have your door slide like new.
|
Are you having trouble sliding your screen door open or closed. Have you checked your rollers/roller assemblies. Don't replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This high-tension steel spring roller assembly fits onto the Columbia Uni-Fit series door. This roller assembly has a 1 in Dia high-density polyethylene roller mounted in the housing. The flat steel spring end catches onto the inside of the door frame while the flat edges of the two tabs extending out in front of the roller restrict the roller from retracting too far up into the door frame as it rolls. This sliding screen door roller assembly insert has a thinner high-density polyethylene frame than the Prime-Line part B 646. It has an adjustable high-density polyethylene inner housing and high-density polyethylene roller. The assembly inserts into the bottom or top of the sliding screen door using the included screws. The roller adjusts to the correct position needed. This style is found on Columbia sliding screen doors but is also used on a variety of other sliding screen door manufacturers. Please note dimensions and design when comparing with old roller. Order yours today and have your door slide like new.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used by metal industries. Center grooved, 1/4 in W, roller. 1-3/4 in L, high-tension, heat treated steel spring. Includes #8 x 3/8 in Phillips sheet metal screw.
|
Prime-Line Door Keeper, Zinc, Includes: (1) Lock and Installation Fasteners
|
Used by many patio door manufacturers. Steel ball bearing roller in adjustable 2-5/8 in L x 1-3/8 in H x 3/4 in D steel housing with 10-32 machine thread hole on top center and 1/4-20 side threads for mounting.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bent spring design used by Academy Mfg and others. Center grooved 5/16 in W wheel, 2-1/4 in L x 5/16 in W flat high-tension heat-treated steel spring and #8 x 3/8 in Phillips sheet metal screw.
|
Steel ball bearing roller, adjustable steel housing assembly. Used by International and other glass door manufacturers. Replaces old-style extruded aluminum assembly. 5/8 in thick, 2-1/8 in L, 1-3/16 in H, 3/4 in overall thickness, 5/8 in W housing dimension. Concave roller edge type. 1 roller assembly.
|
Prime-Line Flexible Universal Bug Strip, Vinyl, Black, 84 in L, 1-3/8 in W
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This sliding glass door roller assembly is constructed from steel and features a height-adjustable housing. The concaved (grooved) edge wheels installed in these roller assemblies are constructed of plastic and include steel ball bearings for smooth and long-lasting operation. The wheels are designed to glide on a single raised aluminum or steel track. This item includes only one roller assembly per package, but a total of two roller assemblies are required for each sliding door. These roller assemblies are used to repair patio sliding doors with missing, damaged or malfunctioning roller assemblies. Installation easy-to-install with a few simple tools. Refer to dimensional line drawing to match product specifications. This style roller is used on Highlight Doors and similar styled patio doors.
|
This is a K-Tab patio door roller assembly with a 1-1/8 in concave steel ball bearing roller. The T-shaped tab (K-tab) is simply slid up into a T-shaped receptacle in the bottom of the patio door. No screws are required for installation. The housing is 3/4 in W and 1-1/4 in H with a 7/8 in dimple width. The dimples secure it within the door's bottom frame. Used by a variety of door manufacturers.
|
For sliding glass doors. Center grooved, 5/16 in W steel ball bearing roller and steel inner race with 1/4-20 x 3/4 in carriage bolt and 1/4 in - 20 hex nut.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used by several patio door manufacturers. Consists of 1/4 in W center groove wheel, high-tension heat treated steel V-spring (2 in L before and 2 in L after bend).
|
Prime-Line Bug Seal, Vinyl, 7 in L, 3/4 to 1-3/8 in W
|
This is a F-tab patio door roller assembly with a 1-1/4 in concave steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two-sides together. The housing is 11/16 in W and 1-3/16 in H with a dimple width of 7/8 in used by Northrup and a variety of sliding patio door manufacturers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This sliding glass door roller assembly is constructed from steel and features a height-adjustable housing. It is a "K" tab patio door roller assembly with a 1-1/4 in concave or grooved nylon ball bearing roller. The "K" tab style back end is a T-shaped tab that is simply slid up into a similar T-shaped receptacle in the bottom of the patio door. No screws are required. The housing is 5/8 in W and 1-3/16 in H with a flare and 3/4 in dimple width. The concaved (grooved) edge wheels installed in these roller assemblies are constructed of plastic and include steel ball bearings for smooth and long-lasting operation. The wheels are designed to glide on a single raised aluminum or steel track. This item includes only one roller assembly per package, but a total of two roller assemblies are required for each sliding door. These roller assemblies are used to repair patio sliding doors with missing, damaged or malfunctioning roller assemblies. Installation easy-to-install with a few simple tools. Refer to dimensional line drawing to match product specifications. This style roller is used on International and similar styled patio doors.
|
This is a 1-1/4 in Dia concave nylon ball bearing roller replacement used on a variety of patio and wardrobe door roller assemblies. It has a steel center race and the standard 1/4 in axle hole and is 5/16 in W. Included are two axle carriage bolts and carriage nuts for installation.
|
Extruded aluminum housing, with steel spring; adjustable wheel with center groove. Fits on International Series 900, 925, 950 doors. Contents: 2 roller assemblies; installation screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used by Air Control, Howmet, Krestmark and many other patio door manufacturers. Steel ball bearing roller and adjustable 2-5/8 in L x 1-3/8 in H x 3/4 in D steel housing assembly with machine threaded holes (10-32 top and 1/4-20 side) for installation.
|
This is a plain back patio door roller assembly with a 1-1/4 in concave or grooved steel ball bearing roller. It has a plain back housing that is 11/16 in W and 1-1/4 in H with a flare width of 13/16 in with a rear adjusting screw. Features a 1/4-20 machine thread mounting hole on-the plain back end and a #10-32 threaded optional use hole on-the top. Used by Blomberg and a variety of other manufacturers of vinyl and metal sliding patio doors.
|
This is a C-tab patio door roller assembly with a 1-1/4 in Dia concave or grooved, steel ball bearing roller. as the C-shaped tab fits around the corner screw, it is captured by the side stile and bottom rail as the screw draws the two-sides together. The housing is 23/32 in W and 1-3/16 in H with a dimple width of 7/8 in and is most often used by Solar Industries and a variety of other patio door manufacturers.
|
|
|
