|
|
|
|
|
|
|
|
|
|
|
|
|
|
Has your sliding screen door handle broken, is it worn out, cracked, been damaged or just worn out. This pull is constructed from durable, weather resistant black plastic. It features a universal, surface mounted, non-handed design that can be used as either a left or right hand pull. The mounting holes are 3 in on center and this handle comes complete with fasteners for your installation. Order yours today and make your sliding screen door secure again.
|
This screen door keeper or strike was often used by Columbia and trim view screen doors as well as many other screen door manufacturers. It is 1/2 in wide with a 9/16 in hook projection. It has an upward hook and adjustment slot that allows it to be adjusted up or down to the correct position to engage the latch.
|
This die-cast keeper or strike is used by many screen door manufacturers. It is 7/32 in W with a 1/4 in deep projection. It has an downward hook and adjustment slots that allows it to be adjusted up or down to the correct position to engage the latch.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Non-handed; mortise installation, used by several door manufacturers. Includes one plastic in side and outside pull, one steel latch assembly, one plastic activator, one pop rivet and installation screws.
|
Has your sliding screen door handle broken, cracked or worn-out. Restore security and function with this replacement sliding screen door handle and latch set. Designed for both left- and right-hand sliding screen doors, this non-handed handle set fits 1/2 in extruded and roll-formed doors with 3 in mounting hole centers. Each set includes an inside pull, outside pull with an integrated steel latch and mounting hardware for a quick and easy installation. The latch measures 2-13/16 in L with a 1/2 in projection and slides vertically to engage Prime-Line keeper A 148. Constructed of durable black plastic housing with a corrosion-resistant steel latch, this handle set provides a long-lasting, reliable replacement to keep your sliding screen door secure and functional.
|
These screen shields provide protection to the screen fabric in and around the area around the screen door handle. Especially useful for any handleset that installs over the screen fabric. Prevents fingers from poking through the screen when reaching for the handle. Saves time and money & extends the life of the screen fabric.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This sliding screen door handle and latch is non-handed and used on 1/2 in THK Columbia doors, as well as a variety of other patio door manufacturers. It contains an inside pull and outside pull. The handles have mounting holes that are 3 in on center and the spring-loaded nylon latch rotates up and down to engage the keeper. Latch can be locked from the inside by the security lock.
|
Has your sliding screen door handle broken, is it worn out, cracked, been damaged or just worn out. This sliding screen door handle and latch is non-handed and used by Jim Walters as well as a variety of other patio door manufacturers. It contains black plastic inside and outside handles. The handles have mounting holes 3-1/4 in on center. The steel latch is 2-3/8 in long with a 11/16 in projection and slides up and down to engage the keeper (Prime-line part A 148, not included). Order yours today and make your sliding screen door secure again.
|
Has your sliding screen door handle broken, is it worn-out, cracked, been damaged or just worn-out. This sliding screen door handle and latch is non-handed, so it can be used on right or left-handed screen doors. Used by a wide variety of screen door manufacturer's that produce hat section style doors. Contains an inside pull, outside pull and steel latch. The black plastic handles has 3 in on center mounting holes. The latch is 3-11/16 in L with a 1-7/16 in projection and slides up and down to engage the keeper. Order yours today and make your sliding screen door secure again.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This sliding screen door handle and latch is used on Anjac as well as other patio door manufacturers. It is non-handed and used on 1/2 in Thick x 1-5/8 in W screen door frame. The nylon latch hook is 3/16 in long fits into a slot or mortise on the edge of the screen door. It has 3-3/4 in mounting holes and can be opened from both sides. There is a night lock on the inside. The nylon latch rotates to engage or disengage the A 125.
|
Non-handed, mortise installation, fits on Academy, Better-Bilt and other door manufacturers. 2 in wide and 3 in between screw holes. Contains one plastic inside and outside pull, one steel latch assembly, one die-cast strike, installation screws.
|
This sliding screen door handle and latch is non-handed and used great aluminum screen doors as well as other patio door manufacturers. It contains a black plastic inside pull and outside pull. The handle mounting holes are 3 in. The steel latch is 2-9/16 in long with a 11/16 in projection and slides up and down to engage the keeper A 125 or A 217.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This sliding screen door handle fits a Columbia 1/2 in THK door as well as a variety of other patio door manufacturers. It contains an inside pull and outside pull. The handles have mounting holes 3 in on center. The spring-loaded nylon latch rotates up and down to engage the keeper (Prime-Line parts A 125, A 163 or A 166). The inside latch lever has a nite lock feature.
|
Flush mount fits into door stile. 1/16 in projection inside/outside of patio door. Reversible for right or left hand application. Packed with 4 different latch hooks to fit virtually all applications. For 1 to 1-1/4 in Thk doors. 6-1/2 in distance between attaching screws.
|
Non-handed, black plastic inside and outside pulls, steel latch hook, steel keeper, vinyl top guides, for 1/2 in thick Columbia Series 4000 screen doors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits all popular flush lock punch outs for 1 in THK doors. 3/4 x 2-3/4 in, universal design, die-cast, chrome finish keeper #E-2040 adjusts vertically. Includes 7-1/4 in L x 7/8 in W inside and outside pulls, latch on inside pull, keeper, installation fasteners and 4 assorted hooks (3/8 in, 3/4 in, 1/2 in and 5/8 in). 6-5/8 in installation hole spacing.
|
Prime-Line Handleset, Aluminum, Painted, Black, Includes: (1) Inside Latch, (1) Outside Pull, (1) Locking Cylinder, (4) Hook Assortment, (1) Keeper and Installation Fasteners
|
Designed to fit 90% of all internally latched doors including Viking. Reversible for right or left hand openings. Automatic unlatching option to prevent accidental lockouts. #E-2054 stamped steel sliding-glass-door keeper allows for vertical adjustments. Stained solid wood handle, all other parts of finished die-cast aluminum. Includes inside pull and latch, outside pull, keeper and installation fasteners. For 1 in the door rails.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Extruded aluminum inside pull with wood grain feature strip, clamp-latch with metal activator, flush extruded aluminum outside pull, used by many glass door manufacturers, latch hook profile is 1/2 in, projection is 1/2 in. Handle type - surface mounted. Latch style - clamp style.
|
Standard reversible surface mount handle set for left or right handed mortise locking doors. Hook style latch, mortise style handle, extruded aluminum inside pull has wood grain feature strip and a black die-cast outside pull designed to be used with any of the following latching units, E-2008, E-2009, E-2014, E-2079 and E-2111.
|
Designed to fit 90% of all internally latched doors including Viking. Reversible for right or left hand openings. Automatic unlatching option to prevent accidental lockouts. #E-2054 stamped steel sliding-glass-door keeper allows for vertical adjustments. Stained solid wood handle, all other parts of finished die-cast aluminum. Includes inside pull and latch, outside pull, keeper and installation fasteners. For 1 in Thk door rails.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Internally latched, reversible for right or left hand openings. Secondary night lock feature prevents external latch operation for added security. Automatic unlatching option to prevent accidental lockouts. E-2054 stamped steel, sliding glass door keeper allows for vertical adjustments. Stained solid wood handle, all other parts of finished die-cast. Includes inside wood pull and latch, outside pull, keeper and installation fasteners. For 1 in THK door rails.
|
Prime-Line Handleset, Aluminum/Wood, Zinc, Zinc, Includes: (1) Inside Pull and Latch Assembly, (1) Outside Pull and Installation Fasteners
|
This is a multi-functional diecast locking patio door outside pull. Spacing for mounting was designed to work on Adam Rite, W and F and other similar type mortise latches. Non-handed design for use on right or left handed patio doors. The tailpiece is notched for different break-off lengths to fit a variety of door widths. Make sure to test fit the length you need before tightening and damaging the lock.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Surface mounted, no mortising required. Separate lock inserted into base permits instant reversibility. Has a fixed anti-lift key to resist unauthorized entry by outside manipulation. Retracts to unlocked position if the door is closed with the hook extended. Prevents damage to keeper and lock assembly. Hook style latch.
|
Extruded aluminum inside pull, clamp latch with metal activator, die-cast outside pull has knock-out for converting to keyed cylinder lock, latch hook profile is 1/4 in, projection is 1/2 in, used by many patio door manufacturers.
|
Extruded aluminum pulls, inside and out. Fixed anti-lift bar for added security. Reversible for right or left hand doors. Contains one inside pull and latch assembly, one outside pull, one face mounting keeper and installation fasteners.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This unique product is the most versatile locking unit available, it will accommodate 7 different hole spacing patterns from 2-11/16 to 6-7/8 in The 3-15/16 in hole spacing is designed for use with mortise lock installations using Adam Rite and W and F mortise locks. These holes are offset 1/8 in from that of the locking cylinder hole. The spacing allows locking unit to adapt to a variety of handle sets. The plug can be knocked out and the lock inserted.
|
Die-cast construction fits most popular flush lock cutouts. Comes complete with keyed cylinder lock, reversible for left or right hand, complete with 4 different hood lengths.
|
If your sliding glass door handle is old, damaged or missing, don't get a brand new door - just replace the door handle! This Prime-line C 1204 sliding glass door handle set makes the DIY project a breeze. Installation is quick and easy, all fasteners necessary are included and the set is non-handed, allowing it to be used on both left and right handed patio sliding doors. It is a mortise/hook style and fits 3-15/16 in hole spacing. The door handle set is constructed of white painted diecast materials with a light stained wood handle, ideal for your white sliding door. The outside pull of this handle set can be converted to an outside locking pull using Prime-line's model numbers E 2144, C 1041 or C 1139. *Product Selection Tip - Besides matching the style and type of locking mechanism, the other main specification to match is the measurement of the mounting hole centers, from center-2-center.
|
|
|
