|
|
|
|
|
|
|
|
|
|
|
|
|
|
Full circle pattern for slow, deep watering around trees, shrubs, vegetable and flower gardens. Fully adjustable from off to 2 gpm and 0 to 2 ft radius. Removable filter screen.
|
Easy to install, remove and reuse. UV resistant and durable. High manufacturing control standards. Pressure compensating. Built in dust cap for protection from debris and insects. Blue Stripe drip NGE 1.0 emitters are perfect for watering individual plants. Color-coded emitters for easy identification.
|
Easy to install, remove and reuse. UV resistant and durable. High manufacturing control standards. Patented Loc-Eze design. Fittings grip tighter as tension increases. Use blue stripe drip 1/2 in fittings to connect 1/2 in hose. Require no glue or clamps.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Full circle pattern for slow, deep watering around trees, shrubs and flower gardens. Installs on 1/2 in NPT riser. Durable plastic and stainless construction.
|
Easy to install, remove and reuse. UV resistant and durable. High manufacturing control standards. Use Blue Stripe drip 1/2 in tie down stakes to secure 1/2 in hose. Easy to use and require no glue or clamps.
|
Use Blue Stripe drip 1/4 in tubing for connecting 1/2 in hose to emitters and micro-sprinklers. Tough, durable construction for longer life. High manufacturing control standards.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tough, durable construction for longer life. High manufacturing control standards. Use for lateral lines with emitters, jets and micro-sprinklers. This larger diameter hose means less friction loss to allow for more emitters on the same line. Linear low density polyethylene hose is made from high-grade polyethylene resins. Carbon black (ultraviolet inhibitor) added for resistance to sunlight deterioration.
|
The Blue stripe drip 9-outlet distribution manifold converts a 1/2 in sprinkler riser for watering up to nine different plants.
|
Tough, durable construction for longer life. High manufacturing control standards. Use for lateral lines with emitters, jets and micro-sprinklers. This larger diameter hose means less friction loss to allow for more emitters on the same line. Linear low density polyethylene hose is made from high-grade polyethylene resins. Carbon black (ultraviolet inhibitor) added for resistance to sunlight deterioration.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Contains an assortment of drip emitters and accessories for your convenience.
|
All inclusive kit saves time and frustration. Tough, durable construction for longer life. Installation kit contains everything you need to hook-up Toro blue stripe drip 1/2 in hose from a valve, riser or faucet. Kit includes one 25 psi pressure regulator, one 125 mesh filter, one hose bibb vacuum breaker, one hose swivel, one 1/2 in x 3/4 in bushing.
|
Professional quality drip tubing. UV resistant and durable. High manufacturing control standards. Pressure compensating emitters are perfect for watering individual plants. Color-coded for easy identification. Cuts installation time, Just drop and roll. 0.5 emitters factory installed every 6 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
Professional quality drip hose. UV resistant and durable. High manufacturing control standards. 1.0 gph emitters installed every 18 in. Use Blue Stripe Drip 1/2 in hose with pre-installed emitters for ground cover, gardens and flower beds. Cuts installation time, just drop and roll.
|
|
|
