Home > HARDWARE > CONSTRUCTION HARDWARE > JOIST HANGERS & CONNECTORS > STRAPS
Sort By:
1 2
FLAT STRAP ZMAX 12GA 3X11-1/4 STRP-TIE HOLDOWN GALV 26-1/8IN STRAP TIE LIGHT GALV 1-1/4X9IN
The Outdoor Accents decorative hardware product line features connectors and fasteners that bring beauty and strength to custom outdoor living structures. The APVST flat strap works for lumber in both nominal and rough sizes. It can be used to connect two beams together or added to any project as a decorative accent. Part of the Avant Collection. The STHD is an embedded strap-tie holdown offering high-loads in both wood and cold-formed steel construction. When installed on the forms with the StrapMate? strap holder or other holding device, the unique design of this cast-in-place strap-tie holdown delivers enhanced stability before and during the pour to help prevent both parallel and perpendicular movement. This results in accurate positioning of the strap and reduced possibility of spalling. The LSTA is designed to resist tension loads in wood-to-wood applications. This light strap-tie utilizes a staggered nail pattern to help minimize wood splitting. The LSTA is designed for use on the edge of 2X members.
STRAP TIE LT GALV 1-1/4 X 12IN T-STRAP GALV 14GA 6 X 6IN L-STRAP GALV 14GA 6 X 6IN
The LSTA is designed to resist tension loads in wood-to-wood applications. This light strap-tie utilizes a staggered nail pattern to help minimize wood splitting. The LSTA is designed for use on the edge of 2X members. The T is designed for beam-to-column applications. This versatile utility strap is T-shaped, making it ideal for transferring tension loads in a variety of applications. The T features well-placed fastener holes and can easily be installed with nails or bolts. The L is designed for beam-to-column applications. This versatile utility strap is L-shaped, making it ideal for transferring tension loads in a variety of applications. The L features well-placed fastener holes and can easily be installed with nails or bolts.
STRAP TIE MED GALV 12GA 27IN STRAP TIE LT GALV 1-1/4 X 18IN STRAP TIE HVYD GALV 12GA 12IN
The MST is designed to resist tension loads in floor-to-floor and other applications. This high-capacity strap features a dense nailing pattern and can be installed with either nails or bolts. The MST is a load-rated, precut strap designed for quick installation and optimal performance. It is suitable for connecting double 2X members or greater. The LSTA is designed to resist tension loads in wood-to-wood applications. This light strap-tie utilizes a staggered nail pattern to help minimize wood splitting. The LSTA is designed for use on the edge of 2X members. The HRS is designed to resist tension forces between two wood members. The HRS6, HRS8 and HRS12 can be installed on the edge of 2X members. These straps are load-rated, precut straps designed for quick installation and optimal performance. The HRS installs where top or bottom plates are cut, at wall intersections and as ridge ties.
L-STRAP GALV 14GA 8 X 8IN L-STRAP ZMAX BLACK 12GA 4X4IN STRAP TIE HVYD GALV 12GA 6IN
The L is designed for beam-to-column applications. This versatile utility strap is L-shaped, making it ideal for transferring tension loads in a variety of applications. The L features well-placed fastener holes and can easily be installed with nails or bolts. Outdoor Accents? flat L-straps from Simpson Strong-Tie? bring decorative appeal and lateral strength to any outdoor living space. They provide reinforcement for a connection where one lumber piece intersects another at a 90 deg angle. This L-strap is easily installed with Outdoor Accents? structural screws and hex head washers. Part of the Avant Collection. The HRS is designed to resist tension forces between two wood members. The HRS6, HRS8 and HRS12 can be installed on the edge of 2X members. These straps are load-rated, precut straps designed for quick installation and optimal performance. The HRS installs where top or bottom plates are cut, at wall intersections and as ridge ties.
STRAP TIE GALV 2-1/16X9-5/16IN STRAP TIE HVYD GALV 12GA 8IN STRAP TIE LT GALV 1-1/4 X 24IN
The ST is designed to resist tension loads in a variety of applications. This economical strap-tie is ideal for installation where top or bottom plates are cut, at wall intersections and as ridge ties. The ST is a load-rated, precut strap designed for quick installation and optimal performance. The HRS is designed to resist tension forces between two wood members. The HRS6, HRS8 and HRS12 can be installed on the edge of 2X members. These straps are load-rated, precut straps designed for quick installation and optimal performance. The HRS installs where top or bottom plates are cut, at wall intersections and as ridge ties. The LSTA is designed to resist tension loads in wood-to-wood applications. This light strap-tie utilizes a staggered nail pattern to help minimize wood splitting. The LSTA is designed for use on the edge of 2X members.
T-STRAP ZMAX BLACK 12GA 4X4IN STRAP TIE GALV 2-1/16X16-5/16 L-STRAP ZMAX BLACK 12GA 4X4IN
Outdoor Accents? flat T-straps from Simpson Strong-Tie? bring decorative appeal and lateral strength to any outdoor living space. They provide reinforcement for a connection where one lumber piece intersects another at a 90 deg angle. This T-strap is easily installed with Outdoor Accents? structural screws and hex head washers. Part of the Avant collection. The ST is designed to resist tension loads in a variety of applications. This economical strap-tie is ideal for installation where top or bottom plates are cut, at wall intersections and as ridge ties. The ST is a load-rated, precut strap designed for quick installation and optimal performance. Outdoor Accents? flat L-straps from Simpson Strong-Tie? bring decorative appeal and lateral strength to any outdoor living space. They provide reinforcement for a connection where one lumber piece intersects another at a 90 deg angle. These straps are easily installed with Outdoor Accents? structural screws and hex head washers.
STRAP TIE MED GALV 12GA 37IN DECK JOIST TIE ZMAX BLK 2X6IN T-STRAP GALV 14GA 12 X 8IN
The MST is designed to resist tension loads in floor-to-floor and other applications. This high-capacity strap features a dense nailing pattern and can be installed with either nails or bolts. The MST is a load-rated, precut strap designed for quick installation and optimal performance. It is suitable for connecting double 2X members or greater. The Simpson Strong-Tie? Outdoor Accents? line of decorative hardware features connectors and fasteners that bring beauty and strength to custom outdoor living structures. The deck joist tie attaches 2X joists to the side of 4X or larger support posts. It installs quickly and easily with the Outdoor Accents? structural wood screw and hex head washer for the look of a bolted connection. Part of the Avant collection. The T is designed for beam-to-column applications. This versatile utility strap is T-shaped, making it ideal for transferring tension loads in a variety of applications. The T features well-placed fastener holes and can easily be installed with nails or bolts.
STRAP TIE GALV 2-1/16X12-13/16 STRAP TIE GALVANIZED 16GA 12IN STRAP TIE MED GALV 18GA 24IN
The ST is designed to resist tension loads in a variety of applications. This economical strap-tie is ideal for installation where top or bottom plates are cut, at wall intersections and as ridge ties. The ST is a load-rated, precut strap designed for quick installation and optimal performance. The ST is designed to resist tension loads in a variety of applications. This economical strap-tie is ideal for installation where top or bottom plates are cut, at wall intersections and as ridge ties. The ST is a load-rated, precut strap designed for quick installation and optimal performance. The MSTA is designed to resist tension loads in wood-to-wood applications. This medium strap-tie utilizes a staggered nail pattern to help minimize wood splitting. The MSTA is designed for use on the edge of 2X members.
T-STRAP ZMAX BLACK 12GA 4X4IN L-STRAP GALV 14GA 12 X 12IN DECK JOIST TIE ZMAX 14GA 4X4IN
Outdoor Accents? flat T-strap from Simpson Strong-Tie? bring decorative appeal and lateral strength to any outdoor living space. They provide reinforcement for a connection where one lumber piece intersects another at a 90 deg angle. These straps are easily installed with Outdoor Accents? structural screws and hex head washers. The L is designed for beam-to-column applications. This versatile utility strap is L-shaped, making it ideal for transferring tension loads in a variety of applications. The L features well-placed fastener holes and can easily be installed with nails or bolts. The DPTZ deck post tie products are used to attach 4 x 4 (DPT7Z) vertical posts to the side of stringers, rims or other wood members.
STRAP TIE GALV 2-1/16X23-5/16 DECK JOIST TIE ZMAX 14GA L-STRAP ZMAX BLACK 12GA 6X6IN
The ST is designed to resist tension loads in a variety of applications. This economical strap-tie is ideal for installation where top or bottom plates are cut, at wall intersections and as ridge ties. The ST is a load-rated, precut strap designed for quick installation and optimal performance. The DJT14Z deck joist tie is designed to attach 2X deck joists to the side of 4X or larger support posts. The DJT14Z can be installed with either nails or bolts. Outdoor Accents? flat L-straps from Simpson Strong-Tie? bring decorative appeal and lateral strength to any outdoor living space. They provide reinforcement for a connection where one lumber piece intersects another at a 90 deg angle. This L-strap is easily installed with Outdoor Accents? structural screws and hex head washers. Part of the Avant Collection.
   
 
1 2