|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to support shelves. 1/4" diameter shank. Safe working load 25 lbs. Boxed loose.
|
National Hardware Shelf Support, Series: 158, 0.62 in Width, 0.05 in Thickness, Steel, Bronze, 25 lb Load Capacity, Suitable For Use With: National 157 Shelf Standards, 0.14 in Hole Diameter, For Supporting Shelves
|
Used to support shelves. Can be used with National 157 shelf standards. Safe working load 25 lbs. Boxed loose.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware Shelf Support, Series: 159, 1/4 in Shank Diameter, 1.22 in Length, 1/2 in Width, 0.05 in Thickness, Steel, Brass, 25 lb Load Capacity, 0.16 in Hole Diameter, For Supporting Shelves
|
National Hardware Pole Socket Set, Series: MPB107, 0.8 in Depth, 0.13 in Thickness, Polypropylene, White, 90 lb Load Capacity, Suitable For Use With: Upto 1-3/8 in Diameter Pole, Includes: (1) Socket Pair Per Pack and Fasteners, For used to mount wood closet poles
|
National Hardware Pole Socket Screw, Series: V108S, NO 12 Screw, 1-1/2 in Length, Round Head, Phillips Drive, Steel, White, BHMA A138.18
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Can be used as a support or brace. Strengths exceed ANSI/BHMA standards. Brackets are designed for use with standard dimensional lumber. First measurement indicates nominal width of shelf leg; second measurement denotes nominal length of wall leg. Bulk pak.
|
National Hardware Shelf Bracket, Series: 110BC, 4 in Length, 1.37 in Width, 3 in Depth, Steel, Zinc Plated, 10 lb Load Capacity, Suitable For Use With: National 110 Shelf Brackets, Includes: (12) No 7 x 3/4 in and 1-1/4 in Screws
|
National Hardware Bracket Screw, Series: V211S, NO 7 Screw, 1-1/4 in Length, 1/2 in Drive, Steel, Zinc Plated, BHMA A138.18
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For brackets. #7 x 3/4? & 1-1/4?. Visual-pack.
|
Designed to attach National model No. 211 brackets to walls and shelves. 6 each No. 7 x 1-1/2" and 6 each No. 7 x 1/2" per pack. Visual-pack.
|
Secures shelf to side wall of closet. Pre-loaded with pins and anchors, no screws needed. Accommodates pole clips and shelf stops in "TotalSlide" system.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware Bracket Screw, Series: V152S, NO 7 Screw, 1/2 - 1-1/2 in Length, Truss Head, Phillips Drive, Steel, Antique White
|
Designed for mounting National's #152 brackets. Phillips truss screws, 4 each of 7 x 1/2 and 7 x 1-1/2 inch. Visual-pack.
|
Designed for mounting National's #152 brackets. Phillips truss screws, 4 each of 7 x 1/2 and 7 x 1-1/2 inch. Visual-pack.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed to attach National model No. 211 brackets to walls and shelves. 6 each No. 7 x 1-1/2" and 6 each No. 7 x 1/2" per pack. Visual-pack.
|
National Hardware Pole Socket Set, Series: BPB107, 0.8 in Depth, 0.13 in Thickness, Polypropylene, White, 90 lb Load Capacity, Suitable For Use With: Upto 1-3/8 in Diameter Pole, Includes: (1) Socket Pair Per Pack and Fasteners, 0.19 in Hole Diameter, For used to mount wood closet poles
|
National Hardware Bracket Screw, Series: V211S, NO 7 Screw, 1-1/4 in Length, 1/2 in Drive, Steel, White
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Vinyl end cap provides protection from cut end of wire shelving that exposes possible rough edges. Large end caps cover the large rod, 0 gauge, .25"H x .4"W x .4"D. Small end caps are for the 4 gauge wire, .2"H x .2"W x .2"D. Designed to be used with ClosetMaid - Shelf & Rod shelving.
|
SuperSlide shelving and hardware allows hangers to slide freely on both Fixed Mount and ShelfTrack mounting systems. Hangers slide without interruption. Snaps onto SuperSlide shelf to support hang rod. Use one every 36 in. of hang rod and at each end of shelf and hang rod. 5.75"H x 0.87"W x 3.87"D. Material: Resin
|
National Hardware Shelf Bracket, Series: 110BC, 5 in Length, 1.34 in Width, 4 in Depth, Steel, Zinc Plated, 10 lb Load Capacity, Suitable For Use With: National 110 Shelf Brackets, Includes: (12) No 7 x 3/4 in and 1-1/4 in Screws
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits up to 1-3/8" in diameter. Includes one pair of pole sockets and screws.
|
Fits up to 1-3/8" in diameter. Reinforced design allows for interior and exterior uses. Single screw mounting. Includes one pair of pole sockets and screws.
|
Pilasters for built-in shelving and book case applications. Adjustable on 1/2" centers. 23 gauge high-strength steel, 5/8" wide x 3/16" deep.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Accepts a 1-3/8" diameter standard wood pole. 2-3/16"OD x 3/4" overall. Includes one pair of pole sockets and two No.8 x 3/4" Phillips flat head screws.
|
Dimensions: 1/16"W x 2-3/8"H x selected depth. For use with Pro Source shelving. UPC tagged.
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
Covers up pole ends, keeps hangers from sliding off, friction fit. For use with 1-1/4" diameter pole (except 0023 uses 1" diameter pole).
|
Designed to fit into the fast mount standards, load tested to 100 lbs.
|
|
|
